HERE IS OUR WORLD FAMOUS VERY POPULAR TRACK JOINER SYSTEM
TAKE PRIDE IN THE PROTOTYPICAL LOOKS OF YOUR RAIL JOINTS
OUR SUPER PRECISION ALL STAINLESS STEEL CODE 332 PROTOTYPICAL TRACK JOINERS
USED AROUND THE WORLD ON BRASS OR SST CODE 332 TRACK
FOR USE WITH OUR PRECISION HEAT TREATED DRILL JIG
TRUE PROTOTYPICAL LOOKS
ALL STAINLESS STEEL RAIL JOINERS
STAINLESS STEEL BOLTS
STAINLESS STEEL LOCKWASHERS
STAINLESS STEEL NUTS
ONE SET WILL JOIN
TWO RAIL ENDS AS SHOWN HERE
THIS IS ABOUT AS REAL AS IT GETS
STRONGER THAN FACTORY BRASS CLIPS
BETTER CONDUCTIVITY
NO UGLY BULKY AFTERMARKET
BRASS RAIL FOOT CLAMP-ONS
NO PHILLIPS OR ALLEN
HEAD SCREWS HERE
THE REAL RAILROADS
DON'T USE THEM EITHER
ONE RAIL JOINER SET INCLUDES
8 SST HEX NUTS
8 SST LOCK WASHERS
4 SST JOINER PLATES
8 SST HEX HEAD BOLTS
CENTER JOINER PLATE HOLES ARE ELONGATED SLIGHTLY TO ALLOW
ANY DESIRED RAIL JOINT GAP
WORKS WITH LGB, ARISTO, USA AND OTHER CODE 332 BRASS OR SST TRACK
AVAILABLE IN THE FOLLOWING SET QUANTITIES
COMBINE PURCHASES TO ADD THE QUANTITIES YOU NEED
2 SETS M.S.R.P. $12.95
6 SETS M.S.R.P. $34.95
12 SETS M.S.R.P.$66.95
18 SETS M.S.R.P. $96.95
30 SETS M.S.R.P. $149.95
ONE SET SHOWN HERE
ONE SET SHOWN HERE
ONE SET SHOWN HERE
ONE SET SHOWN HERE
FREE SHIPPING
2 SETS @ $6.47 SET
6 SETS @ $5.82 SET
12 SETS @ $5.58 SET
18 SETS @ $5.39 SET
30 SETS @ $5.00 SET
GOOD VALUE
GREAT VALUE
GREATER VALUE
SILVER VALUE
FREE SHIPPING INCLUDED
60 SETS M.S.R.P. $269.95
FREE SHIPPING
60 SETS @ $4.50 SET
GOLD VALUE
FREE SHIPPING INCLUDED
100 SETS M.S.R.P. $399.95
FREE SHIPPING
100 SETS @ $4.00 SET
PLATINUM VALUE
FREE SHIPPING INCLUDED
OUR POPULAR COMBINATION STARTER PACKS
INCLUDES THE DRILL JIG AND TRACK JOINERS AND ADDITIONAL DRILL(S) AS SHOWN BELOW
DRILL BIT INCLUDED
PLUS 2 DRILL BITS
PLUS 3 DRILL BITS
PLUS 4 DRILL BITS
+
+
+
+
WHY WOULD ANYONE WANT ANY OF THE FOLLOWING NON-PROTOTYPICAL LOOKING RAIL CLAMPS OR SLIP ON RAIL JOINERS ON THEIR OWN RAILROAD? UNDER RAIL CLAMPS MAY BE SOMEWHAT EFFICIENT, BUT THEY ONLY LOCATE THE FOOT OF THE RAILS, NOT THE WEB OF THE RAIL AS REAL RAILROADS DO AND THESE CLAMPS LOOK OUT OF PLACE IN YOUR RAILROAD ENVIRONMENT,
THEY ARE VERY BULKY.
THE FACTORY SUPPLIED SLIP ON JOINERS ARE NOT PROTOTYPICAL EITHER AND THEY USE VERY TINY SCREWS WITH ALLEN HEX SCREWS OR WORSE LOOKING PHILLIPS SCREWS TO HOLD JOINER TO RAILS.
WE USE ALL STAINLESS STEEL
BOLTS, NUTS AND LOCK WASHERS ON OUR STAINLESS STEEL RAIL JOINERS
NEVER RUST OR LOSE CONDUCTIVITY
WORKS ON ALL CODE 332
BRASS OR STAINLESS STEEL
STRAIGHT AND RADIUS TRACK
WORLDWIDE
SHIPPING
FREE SHIPPING
ON ANY COMBINATION QUANTITY BELOW
OF RAIL JOINERS WITH DRILL JIG AND DRILL(S)
15 SETS FOR $152.95
30 SETS FOR $214.95
FREE SHIPPING
FREE SHIPPING
DRILL JIG INCLUDED
DRILL JIG INCLUDED
GOOD SELLER
OUR BEST SELLER
FREE SHIPPING INCLUDED
FREE SHIPPING INCLUDED
60 SETS FOR $328.95
FREE SHIPPING
DRILL JIG INCLUDED
LARGER LAYOUTS
FREE SHIPPING INCLUDED
100 SETS FOR $439.95
FREE SHIPPING
DRILL JIG INCLUDED
GREAT CLUB OFFER
FREE SHIPPING INCLUDED
PLUS 2 DRILL BITS
PLUS 3 DRILL BITS
PLUS 4 DRILL BITS
DRILL BIT INCLUDED
+
+
+
+
+
+
+
+
GET A FREE NUT DRIVER WITH THE FOLLOWING COMBO PACKS
REG. $8.95
NEED A HIGH QUALITY NUT DRIVER
This is a Precision Nut Driver by DuraTrax USE WITH SST JOINER TRACK NUTS
FEATURES: Hardened Chrome Vanadium shaft & end adds strength and durability.
Rubberized handle with textured finger grip combines comfort with
a slip-free hold. Top of handle has flats on both sides so it
won't roll away when set down on a work surface.
Tapered handle allows rapid rotation.
The size is printed, in White, on the Black handle.
Comes in a clear plastic cover on a peg board header card.
INCLUDES: One Precision Nut Driver
SPECS: Socket Size: 5/32"
Shaft Length: 75mm
Overall Length: 175mm
Handle Top Flats: 15mm and 20mm
Precision Nut Driver by DuraTrax ONLY $8.95
FOR USE WITH OUT SST TRACK JOINER NUTS
THE RAIL JOINERS HAVE A
SLIGHTLY ELONGATED SLOTTED HOLE
TO ALLOW FOR EXPANSION AND CONTRACTION AND
FOR ADJUSTING THE GAP BETWEEN RAILS
SENIOR CITIZENS 55+ OR VETERANS RECEIVE ADDITIONAL DISCOUNT
Please note:
All sales are final. All items we sell are have a no return for cash refund policy, we will replace any defective parts or items at our cost,and will give you a merchandice credit for items you return at your expense and we will exchange it for other items we sell, you pay shipping costs. Thank you for understanding we are not a big box chain store and take returns if you change your mind etc. 07-19-2009
